Smart Wifi Plug Untuk Penghematan Energi Kipas Angin Di Asarma PTDI-STTD
Abstract
Electricity consumption in educational settings is often inefficient, especially in student dormitories where appliances such as fans are often left on even when the rooms are unoccupied. This behavior results in significant energy waste and increased utility costs. In accordance with Presidential Instruction No. 1 of 2025, which emphasizes strict budget efficiency, this study explores the impact of Smart WiFi Plug technology on reducing electricity usage and operational costs in PTDI-STTD dormitories. The study involved collecting data on fan power ratings, monitoring daily usage before and after implementation, and calculating electricity consumption using the kilowatt-hour formula. The findings revealed a 30% reduction in electricity usage, with monthly costs decreasing from Rp22,500 to Rp15,750 per fan, resulting in annual savings of Rp73,872,000. This demonstrates that Internet of Things (IoT)-based technology can significantly enhance energy efficiency through remote control and scheduled device operation. These results highlight the potential for broader adoption of smart energy solutions in other educational institutions.
Keywords: Energy efficiency, Smart WiFi Plug, Internet of Things, dormitory management, electricity cost reduction
References
[2] IEA. 2020. Energy Efficiency 2020.
[3] Rachman, Arif, E. Yochaanan, Andi Ilham Samanlangi, and Hery Purnomo. 2024. Metode Penelitian Kuantitatif, Kualitatif, Dan R&D. 1st ed. edited by B. Ismaya, A. Anggraini, M. Raditya, and Utamirohmasari. Kab. Karawang: CV Saba Jaya.
[4] Ainnur Rahman, Rizal, Odi Nurdiawan, and Arif Rinaldi Dikananda. 2024. “Penerapan Kendali Sistem Otomatis Pada Lampu Halaman Asrama Menggunakan Arduino Pada Pondok Pesantren Al- Ma’Rifah.” JATI (Jurnal Mahasiswa Teknik Informatika) 8(1):645–52.
[5] Atzori, Luigi, Antonio Iera, and Giacomo Morabito. 2010. “The Internet of Things: A Survey.” Computer Networks 54(October):2787–2805.
[6] Khumaidi, Ali. 2017. “Pemanfaatan Internet of Things Untuk Monitoring Dan Penghematan Peralatan Listrik Pada Gedung.” (July):604–11.
[7] Lee, Jay, Behrad Bagheri, and Hung An Kao. 2014. “A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems.” Manufacturing Letters (December):18– 23. doi: 10.1016/j.mfglet.2014.12.001.
[8] Ragali, Amirul Fadly, Aryuanto Soetedjo, F. Yudi Limpraptono, and Teknik Elektro. 2024. “SISTEM MANAJEMEN ENERGI LISTRIK BERBASIS OKUPANSI MENGGUNAKAN TEKNOLOGI IOT DI LABORATORIUM OTOMASI DAN ROBOTIKA TEKNIK ELEKTRO ITN MALANG Amirul.” 08:325–37.
[9] Rifa’i, Mahmud. 2024. “PERANCANGAN SMART PLUG SYSTEM BERBASIS INTERNET OF THINGS.” 683–88.
[10] Suherman, Rano, Punawarman Kahfi Nataraja, Andhika Pratama, and Kahfi Hafidzul. 2023. “ELECTRICITY MANAGEMENT SYSTEM WITH TECHNOLOGY INTERNET OF THINGS.” Techno Nusa Mandiri: Journal of Computing and Information Technology 20(September):95–101.
[11] Salomo, Gerald. 2024. “Smart Energy Management: Efisiensi Energi Melalui Monitoring Dan Pengendalian Perangkat Listrik Berbasis IoT.” (December):8.
This work is licensed under a Creative Commons Attribution 4.0 International License.
_uk200_pxl.jpg)
_Barcode3.png)
